Exhibitor Profiles

A.W.S. CORPORATION SRL

• Air pollution control systems : Wet electrostatic precipitators (WESP), Venturi scrubbers, Acid gas cleaning scrubber,  NOx control systems (SCR/SNCR), FIBERWIND candles plant, Spray dryer absorbers 
• Aerosol, spray and Mist separation : FIBERWIND candles, TIDEVANES, Meshpads 
• Tower internals
• Oil mist separator
• Atomizing Nozzles technologies
• Pilot plants

Air Products

Air Products is a world leader in the supply and service of gas separation systems. 230+ Air Products PRISM Membrane Systems are found in ammonia synthesis plants around the world operating efficiently and economically. PRISM Membrane Systems increase the efficiency of ammonia plants by recovering hydrogen from purge gas streams.

Alfa Laval Olmi Spa

Alfa Laval puts 80 years of experience in delivering high-pressure heat exchangers to the toughest of industries to work for you. Each Alfa Laval Olmi heat exchanger is custom-made and built to last. A wide range of metal and metal alloys – from plain carbon steel and stainless steel to duplex and super-duplex, titanium, zirconium, high nickel alloy, copper alloys, and aluminum are available. Also, a wide range of high-level equipment – from process gas boilers packages to urea strippers and carbamate, from very high-pressure shell-and-tube heat exchangers to large tubular reactors – along with specialized site services, are available.

Alfa Laval Packinox

Due to its unique method of forming large plates by explosion under water, Packinox welded plate heat exchanger is ideal for demanding heat recovery duties in processes with high pressures and temperatures. Its outstanding thermal performance and superior hydraulic efficiency allows for replacing multiple large Shell and Tubes by one single, more compact unit.
For Methanol / Ammonia synthesis, Alfa Laval Packinox Converter Preheaters offer against S&Ts the advantage of capital savings on installation, transport, foundation and piping, in addition to lower operating costs.

Alvigo

ALVIGO is an international engineering contractor comprising leading process technology and engineering companies KHIMTEKHNOLOGIYA, NIAP, GIAP and STC ALVIGO. 
We provide the complete package of engineering services to fertilizer and chemical producers. Our knowledge and expertise enable us to provide an engineering services starting from feasibility studies through the basic, authority and detail engineering to commissioning of energy efficient and cost-effective fertilizer and chemical plants.

AMETEK Land

AMETEK Land specializes in industrial infrared temperature measurement instruments. It’s latest innovation, the Near Infrared Borescope 3XR for steam reformer and cracker tube continuous temperature measurement and furnace optimisation and monitoring, provides a high resolution thermal image with real-time continuous high-accuracy temperature measurements of tube wall and refractory wall surface.

AUMUND Fördertechnik GmbH

AUMUND Fördertechnik GmbH (AUMUND Group) specializes in efficient conveying solutions for all kinds of bulk materials. The proven technology is well-known for handling abrasive, hot or sticky materials. Successful projects in the potash, phosphate and  chemicals & fertilizer industries justify the excellent reputation. A comprehensive range of products is available including all kinds of pan, apron and chain conveyors, as well as bucket elevators and silo or storage discharge machines.

AVEVA

AVEVA is a global leader in engineering and industrial software driving digital transformation across the entire asset and operational life cycle of capital-intensive industries.

The company’s engineering, planning and operations, asset performance, and monitoring and control solutions deliver proven results to over 16,000 customers across the globe.
AVEVA is headquartered in Cambridge, UK, with over 4,400 employees at 80 locations in over 40 countries.

BCInsight Ltd

BCInsight Ltd is a totally independent private publishing company providing analysis, comment and statistics on the world-wide production, trade, transportation, handling and consumption of fertilizers, fertilizer raw materials, sulphur and certain other minerals and chemical, publishing three titles, Nitrogen+Syngas, Fertilizer International and Sulphur.
Celebrating 60 years of service to the industry Nitrogen+Syngas magazine provides unrivalled technical and market coverage of synthesis gas and its derivatives on the nitrogen side – ammonia, urea, nitric acid, ammonium nitrate, UAN, hydrogen, methanol, gas-, biomass- and coat-to-liquids technologies.   Nitrogen+Syngas is tailored to meet the needs of the nitrogen and syngas industries worldwide making it essential reading for all sectors of the industry over the past 60 years.
www.nitrogenandsyngas.com

BD Energy Systems

BD Energy Systems, LLC – a world leader in plant revamps and modernizations based out of Houston, Texas, USA – works together with Parrish Process Services to generate detailed overall plant Heat and Material Balances and to bring in-depth experience on evaluating equipment performance for debottlenecking and optimization. BD Energy Systems has executed more than 160 successful projects on Ammonia, Methanol and Hydrogen plants of various licensor designs. Projects include: Plant Relocations, Plant Relocation Economics, Furnace Revamps & Modernizations, Furnace Optimization, NOx Reduction & Retrofits, including Plant Evaluations/Plant Audits, Turnaround Planning, Construction, Training, Commissioning and Start-up Services.

Begg Cousland Envirotec Limited

Begg Cousland Envirotec Limited specialises in Mist Elimination and Air Pollution Control Equipment as used in Fertiliser & Chemical Plants. The Knitted Wiremesh and Candle Filters remove contaminant liquids from process gas, and control atmospheric emissions. We offer optimum designs of filtration & gas scrubbing systems, including our unique Rotary Brush scrubber for Prilling Towers, Granulators, Dryers, Evaporators, Neutralisers etc. in AN, TAN, CAN, Urea & NPK plants.

Belleli Energy CPE / Walter Tosto

The Tosto Group consists of three major Companies: Walter Tosto SpA, its subsidiary Walter Tosto WTB Srl and Belleli Energy CPE Srl, recognized worldwide as leading manufacturers of critical equipment for Ammonia, Urea and Methanol markets, besides Oil&Gas, Petrochemical, Gas Monetization and Nuclear industries.
The manufacturing activities are carried out in the companies’ facilities located in Chieti and Ortona - Italy (Walter Tosto SpA), Bucharest - Romania (Walter Tosto WTB) and in Mantua - Italy (Belleli Energy CPE). 
For Ammonia, Urea and Methanol markets the 3 companies supply critical items such as Ethylene Oxide Reactors, Methanol Reactors, Urea Reactors, Urea Pool reactors, Urea Scrubber, Urea HP Strippers, Waste Heat Boilers and Ammonia Converters.

Bertsch Energy GmbH & Co KG

BERTSCHenergy excels in the unique area of the design and fabrication of Process Heat Recovery Systems and Pressure Equipment for Steam Reforming (Hydrogen, Ammonia, Methanol). With our special know how we are able to provide to the customer a significant quality- as well as cost related advantage, defined in the combined service of own engineering and in-house fabrication.

BHDT GmbH

Decades of experience make BHDT well known as a manufacturer and reliable partner of high pressure valves (only out of forged material) , all kind of fittings and prefabricated HP isometrics (spools) especially for Urea and Ammonia plants .

Special know-how in the field of material science (Austenitic steel 316LUG , 25Cr-22Ni-2Mo , Duplex and Superduplex) for manufacturing of such high pressure equipment in cooperation with all major licensors.

Blasch Precision Ceramics

Blasch Precision Ceramics is an advanced refractory manufacturer specializing in close tolerance, complex shapes. We offer sophisticated, custom solutions that improve plant performance, efficiency and costs in challenging environments.

Blasch’s StaBlox™ Reformer Tunnel System is a revolutionary, mortarless approach to primary reformer flue gas tunnels that improves reliability, gas flow, temperature distribution and is 15x faster to install than brick and mortar tunnels.  

Boldrocchi

Boldrocchi is an international engineering and manufacturing firm with over 100 years experience, products in over 140 countries and offices worldwide.

Boldrocchi specializes in a number of product fields including fans, blowers & compressors, heat exchangers & coolers, heavy-duty dampers and noise protection/silencers. Our integrated approach easily allows us to be a single point responsibility for several processes in the O&G industry including sulfur recovery, hydrogen reformers, ethylene cracking furnaces, catalyst cracking reduction (CCR) and gas treatment units. Our systems are customized, API compliant and designed to withstand the demands of O&G. End users and licensors alike have recognized Boldrocchi for the performance and reliability of our systems’ designs and fabrication.

Boreal Europe Bv

Our multi-sensor gas-analysers for ultrafast detection of NH3, CH4, CO2, CO, N2O and may other gases.  Fast online concentration determination in ambient air or in a process-line. Technology based on tuned laser spectroscopy. Up to 8 sensors can connected and handled by one single analyser.
• On-line process monitoring with a reaction time of less than 1 second
• Safety monitoring by laser-based Point sensors and open path sensors
• On-line Emission or stack monitoring.  Stack and tower /roof sensors 

Advantages:
• Non extractive method, fast and accurate.
• No memory effects. Accurate and very reliable.
• No Saturation effects. High concentrations do not influence the reaction of the sensor.
• No chemicals, fluids or other usable parts needed.
• Sensors itself do not need to be calibrated (ask us why)

BORSIG Process Heat Exchanger GmbH

BORSIG Process Heat Exchanger GmbH offers pressure vessels and heat exchangers for cooling gases at very high temperatures (up to 1,500 °C) and high pressure (up to 35,000 kPa) such as waste heat recovery systems, waste heat boilers for ammonia, methanol and hydrogen plants,  synloop waste heat boilers etc.

Butting

BUTTING is one of the leading processors of stainless steels. Products include:
• Stainless steel welded pipes
• Clad pipes
• Customised components
• Spools and plant construction
Our core competences are in forming and welding techniques and in materials engineering. BUTTING products meet the highest quality standards. Customers all over the world are using the products of this family-owned company. The variety of services can be seen in the structure pipes for the tallest building in the world, the Burj Khalifa / Dubai, or the fuel lines for the Ariane launch vehicle as well as over 1,900 km of clad pipes for various offshore projects.

Casale

Established in 1921, Casale greatly contributed to the history of ammonia production and nowadays is a world leading licensor and engineering contractor for the production of   ammonia, urea, melamine, methanol, syngas.  In 2014, following an acquisition from Borealis (formerly GPN), Casale expanded its portfolio to include also the processes for the production of nitric acid, AN, UAN, and multi-nutrient fertilizer products, including their granulation technology.
Through its sister company, Casale Project, Casale is also in a position to extend the services offered up to EPC contracting.

CellMark Chemicals

CellMark Chemicals has offices in 14 countries and is active in numerous industries including oil and gas, for which we produce proprietary products for the removal of CO2 from gas streams. The products include catalysts, corrosion inhibitors, antifoam and custom formulations tailored to meet customer defined requirements.

Christy Catalytics

Since 1922, Christy has supplied a complete range of industrial ceramic and refractory materials to the global syngas market.  We also offer a full range of tower packing and internals for packed tower equipment.

Signature products:

- PROX-SVERS® catalyst bed support balls made of high-purity alumina or clay
- CUSTOM-CRAFTED™ alumina hexagonal target tiles
- CHRISTY®PAK Tower Packing and Internals for packed tower equipment available in a wide variety of configurations and materials of construction.
-Other refractory products for the syngas industry including tunnel cover tiles, burner blocks and ferrules.

Clariant

Clariant’s Catalysts business unit is a leading global developer and producer of catalysts for industrial processes since the acquisition of Süd-Chemie in 2011. With a total of 16 production sites (incl. Joint Ventures) and 11 R&D and technical centers it is headquartered in Munich, Germany. Approximately 2061 employees serve customers around the world. Aimed at delivering sustainable value to customers, Clariant’s catalysts and adsorbents are designed to increase production throughput, lower energy consumption, and reduce hazardous emissions from industrial processes. The broad portfolio also includes products that enable the use of alternative feedstock for chemical and fuel production.  

Continental Industrie – Single Stage Turbo Compressors and Multistage Centrifugal Blowers

Since more than 40 years CONTINENTAL INDUSTRIE is setting new standards in Blower technology.
We manufacture and supply quiet Multistage Centrifugal Blowers and integrally geared Turbo Blowers for air and gas handling applications (optional ATEX).
Whenever you require dry, clean and nonpulsing air or gas you should specify Continental Industrie.

Entechmach RPC LLC

Research-and-production company ENTECHMACH is situated in Saint-Petersburg, Russia and has been in the market of power-engineering for over 25 years now. Main activity of the company is modernization of turbocompressor equipment for various industries and companies with different goals, from increasing the efficiency and reliability to lowering the energy consumption.

EUROTECNICA CONTRACTORS AND ENGINEERS SPA

Established in 1962, and headquartered in Milan - Italy, Eurotecnica Contractors and Engineers SpA is known for its leading position as technology provider, designer and implementer of melamine production plants. 
With 40 years of experience in the melamine, Eurotecnica has transformed this business from a market with few players to a worldwide open market.
Urea-melamine easy integration, total-zero-pollution, low energy consumption, superior reliability, are top-notch features of proprietary Euromel® melamine process.
Twenty-one melamine plants, accounting for more than 670,000 MTPY in licensed nameplate capacity, are based on Euromel® melamine process.
Since 2007 ETCE has been part of Proman Group, a global leader in natural gas derived products, with operations and assets all over the world including in Europe, the United States, Trinidad and Tobago and Oman.

FIC SPA – Bulk Solid Heat Exchangers

FIC designs and manufactures Bulk Solid Heat Exchangers for fertilizers and other kinds of granulates. We have available a Pilot Equipment for tests on site, to set the best specific configuration. 
FIC, founded in 1951 is a specialist of Heat Transfer based on Dimple Plates, having specific know-how and expertise. 

Flexitallic UK Ltd

For over 100 years, Flexitallic has been at the forefront of the gasket and sealing industry, providing innovative sealing solutions.  These products include Thermiculite® high temperature gasket material, which ensures that seals maintain their integrity at maximum service  temperatures far exceeding that of graphite.

Gemaco Piping

Since 25 years we mainly focus on demanding industrial applications where urea and nitric acid grades, austenitic stainless steel and nickel alloys play a central role.
The right choice of material ensures that the projected design life of your specific application is successfully reached without unnecessary downtime, resulting in production loss or increased maintenance.

Giammarco-Vetrocoke

Giammarco-Vetrocoke is Process Licensor for Low Energy Carbon Dioxide removal and recovery.

Giammarco-Vetrocoke service includes
Process Design Package supply for new and revamped units
Plant surveys
Feasibility studies
Energy saving and/or capacity enhancement
Site assistance for mechanical inspection, pre-commissioning, commissioning and start up
Performance evaluation
Training of personnel

Greens Combustion

Greens Combustion Limited, based in the UK was acquired by Airoil Flaregas Private Limited in 2015 and together focus globally on the refinery, petrochemical and fertiliser markets supplying burners, thermal oxidisers and flare systems. 
In-house manufacturing capabilities alongside an international supply chain operation provides for flexible manufacturing options and a newly opened comprehensive combustion research and testing centre allows burner test firing from 0.5 to 40 MW for gas, liquid and solid fuel applications.
Greens’ expertise is not only in the supply of new equipment but also the study of installed equipment which is required to be revamped, upgraded or replaced. 

Grupa Azoty S.A./INS Pulawy

Grupa Azoty and INS Pulawy are well-known Polish producers of sorbents and catalysts for ammonia and hydrogen applied in Europe and overseas for over 50 years (feed purification, reforming,  HT, LT shifts, methanation, ammonia synthesis, N2O abatement, hydrogenation and the others). 
INS offers the turn-key projects of ammonia plants revamping.

Haldor Topsoe A/S

Haldor Topsoe is a world leader in catalysis and surface science. We are committed to helping our customers achieve optimal performance. We enable our customers to get the most out of their processes and products, using the least possible energy and resources, in the most responsible way. This focus on our customers’ performance, backed by our reputation for reliability, makes sure we add the most value to our customers and the world. Learn more at www.topsoe.com

HAVER & BOECKER

HAVER Chemicals and HAVER NIAGARA (Processing Technology) being part of HAVER & BOECKER, Machinery Division, both specialize in packaging technology. It develops, produces and markets systems and plants for filling and processing loose, bulk chemicals. The product range includes packing and loading systems for powder-type and granulated materials as well as filling stations and complete filling lines for liquid and pasty products. The product range is supplemented by screening machines, machines for washing and pelletizing plates in the mineral processing industry. 

Heraeus

Heraeus Precious Metals is a leading provider of precious metals services and products. Our extensive portfolio includes products and services for industrial ammonia oxidation and hydrogen cyanide. We supply catalytic gauzes and secondary catalysts for N2O reduction, as well as support our customers on their choice of best catalyst design.

Heurtey Petrochem Solutions

 

Heurtey Petrochem Solutions is a world leader in Process Furnaces for refining, petrochemical and hydrogen/syngas markets. It provides a comprehensive offer including the design and manufacturing of Process Furnaces, waste heat recovery units as well as a complete range of services.
It is part of the Axens Group, a leading provider of technologies, equipment, modular units, catalysts, adsorbents and related services.
Thanks to its strong regional operating centers and its fully owned manufacturing facilities, Heurtey Petrochem has supplied thousands of process furnaces and modular treatment units over the last 60 years.

IWF Group

IWF group based in France is a worldwide company involved in Fertilizer’s industry through its subsidiaries: 
- RBL-REI for mining conveying systems 
- Allia for design & manufacturing of exchangers for highly corrosive products 
- Grelbex for granulators & dryers
Services & Equipment offered by IWF Group are based on a long expertise.

John Zink Hamworthy Combustion

John Zink Hamworthy Combustion (JZHC) is the global leader in emissions-control and clean-air combustion systems. Our Smart Combustion™ solutions combine our expertise with advanced digital technology to help optimize equipment performance and efficiency in real-time. Trusted worldwide, JZHC has more installed equipment than any other manufacturer in our industry.

Johnson Matthey

Johnson Matthey is a global leader in science that enables a cleaner and healthier world and our vision is for a world that’s cleaner and healthier; today and for future generations. With over 200 years of sustained commitment to innovation and technological breakthroughs, we improve the function, performance and safety of our customers’ products. We use science to create innovative products and our science has a global impact in areas such as low emission transport, pharmaceuticals, chemical processing and making the most efficient use of the planet’s natural resources. One in every three new cars carries an emission control catalyst from Johnson Matthey; toxic carbon monoxide and unburned hydrocarbons go into the catalyst, cleaner air comes out. Our catalysts stop around 20 million tonnes of pollutants in their tracks every year.  Today more than 14,000 Johnson Matthey professionals collaborate with our network of customers and partners to make a real difference to the world around us. We remain committed to tackling new challenges to build a cleaner and healthier future for the generations to come.

KBR Technology

KBR is a global provider of differentiated professional services and technologies across the asset and program lifecycle within the Government Solutions and Energy sectors. KBR employs approximately 38,000 people worldwide (including our joint ventures), with customers in more than 80 countries, and operations in 40 countries, across three synergistic global businesses: Government Solutions, Technology Solutions and Energy Solutions.

KBR Technology Solutions is focused on the monetization of hydrocarbons in refining, olefins, chemicals, ammonia and fertilizer, evaporation and crystallization, acid treatment, automation technologies, etc. KBR has licensed, designed or constructed more than 60 greenfield refineries and over 1,000 refining units of every type and size the world over. KBR has been a leader in olefin plant design, construction and technology development for more than 50 years. In ammonia technology, KBR has been involved in the licensing, design, engineering, and/or construction of more than 230 grass roots ammonia plants and over 100 revamp ammonia projects globally.

Kelvion

Kelvion – Experts in Heat Exchange
Kelvion is a globally active manufacturer of industrial heat exchangers for different kind of markets. Since November 2015 the former subsidiaries of GEA Heat Exchangers have been operating as a standalone company under the name of Kelvion. A new name but with proven expertise, unique competence and a large product portfolio. With plate heat exchangers, shell & tube heat exchangers, finned -tube heat exchangers, modular cooling towers and refrigeration heat exchangers - the company reaches customers in all global markets.

Key-Tech Engineering

Coming Soon 

Kimre, Inc.

For more than 45 years, Kimre engineers and application specialists have been solving process gas stream and emission problems in plants around the world. At Kimre, we design, manufacture and install complete systems, fiber bed filters and high-performance - interlaced mesh mist eliminators. We offer engineering services, field service and pilot testing.  Our combined experience results in a superior understanding of gas and vapor stream separation and mass/heat transfer. From the first inquiry to the final installation, we will meet our commitment to deliver a quality engineered product that will exceed your expectations.
Visit us at www.kimre.com to learn about our products and services:
AEROSEP® Multi-Stage Aerosol Separation 
B-GON® Mist/Fume Eliminators 
DRIFTOR® Drift Eliminators 
KIMRE CANDLE Fiber-Bed Coalescing Filters
KON-TANE® Scrubber Tower Packing
SXF™ Semi-Cross-Flow Contactors
LIQUI-NOMIX® Liquid/Liquid Separation

Kinetics Process Improvements, Inc

Kinetics Process Improvements (KPI) is a leading Process Consulting, Design and Engineering Company located in Houston (USA) since 2005. We specialize in Revamp Design and Basic Engineering of Ammonia & Methanol Plants to improve Plant Capacity, Efficiency and Reliability including the revamp design of Reformers and CO2 Removal systems. We are now offering a very cost-effective integrated solution to significantly increase Process Air Compressor capacity without any expensive compressor upgrades.

Our portfolio spans over 100 projects globally for over 60 different clients. We also provide customized process and plant troubleshooting training in Ammonia & Methanol plants. We have already provided training to more than 500 engineers and operating personnel. 

Koch Agronomic Services

Koch Agronomic Services produces and markets plant performance solutions for the world’s top agriculture producers. We are committed to delivering exceptional value through an innovative portfolio. 

N-TEGRATION™ Technology from KAS is a new offering designed to enable production of enhanced efficiency fertilizers (EEF) at urea manufacturing facilities. This platform offers fertilizer producers the ability to integrate specifically engineered additives into urea to create differentiated product that addresses the growing industry need for nitrogen loss prevention. 

Koch-Glitsch

Koch-Glitsch is a global leader in developing, engineering, designing, and manufacturing a complete line of mass transfer and separations technology equipment for the chemical, petrochemical, refining, and gas processing industries. Koch-Glitsch can provide a complete solution for each unique project with its wide range of products and service capabilities.

Krastsvetmet

Krastsvetmet is the global company offering closed loop solutions for nitric acid plants:
 Platinum catalyst for ammonia oxidation process.
 Primary N2O abatement systems.
 Precious metals refining.
 Coated multi-functional gauze catalyst.
 Equipment cleaning and sludge refining.
 Air, ammonia and mix-gas filtration systems.
 Precious metals catchment filters.
 CFD simulation and process modelling.
 Engineering and technical consulting.
 Research and development.

Linde Engineering, Linde Aktiengesellschaft

Your partner for the production and processing of gases.

Linde Engineering is a leading player in the international plant engineering business. Across the globe, we have delivered more than 4,000 plants and cover every step in the design, project management and construction of turnkey process plants offering maximum capital efficiency.

Discover how we can contribute to your success at www.linde-engineering.com

LLC «NIAP-KATALIZATOR»

LLC "NIAP-KATALIZATOR" is among leading manufacturers of industrial catalysts in the territory of the former USSR. Half a century of experience in the development, production and operation analysis of the widely used commercial catalysts allows us to be at the forefront of the world industrial catalysis. Our catalysts for desulfurization, hydrocarbons reforming and methanation are unique for some process parameters.

LTS Energy

Manufacture of Wireloc® Clamp Connectors and FlangeTec® Compact Flanges for Urea Synthesis and Ammonia piping systems where crevice corrosion and cyclic conditions exist providing superior leak tight performance with up to 65% weight savings over ANSI Class 2500lb standard flanges. ASME B31.3, ASME VIII Div 1,2 & 3 Compliant.

Magnetische Prüfanlagen GmbH

Magnetische Pruefanlagen GmbH specializes in the testing of reformer tubes and associated components.  The processes used include a proprietary eddy current technology combined with the latest laser measurement techniques. These techniques are applicable for all SMR’s and DRI plants. Remaining Tube Life Assessments which do not involve removing sample tubes out of the furnace are also available.
MP’s techniques have been proven through 30 years of implementation and place MP as the leading reformer component inspection company in the world with more than 150 reformers per year.

Mannesmann Stainless Tubes GmbH

Mannesmann Stainless Tubes (member of Salzgitter Group) is a leading producer of seamless Stainless, Duplex, Super Duplex and Nickel based alloy tubes and pipes. Our manufacturing program includes outside diameters from 6 to 273 mm, with wall thicknesses from 0.5 to 50 mm. The CRAs and heat resistant materials cover application like Fertilizer industry (stripper  and  carbamate condenser tubes as well as  piping material), Oil & Gas, Power  Generation , Chem&Petrochem Industry , Mechanical application and many others.

Manoir Industries

Manoir Industries, with its worldwide global production network and its state-of-the-art R&D Center, develops proprietary Manaurite® alloys and manufactures cast and boilermaking components for the petrochemical industry. For the N+S market, its range of products includes spuncast catalyst tubes and manifolds, hairpins, fabricated cold collectors and transfer lines, installed inside or just outside the primary reformer. Services are provided such as its robotic tube cleaning to foster better furnaces’ operability and to make significant energy savings.

Mitsubishi Heavy Industries Engineering, Ltd.

Mitsubishi Heavy Industries Engineering offers reliable technologies gained from engineering synergies realized within Mitsubishi Heavy Industries Group.
We contribute to the development of society by supplying numerous Engineering, Procurement and Construction (EPC) projects covering large-scale infrastructure, such as chemical plants, environmental plants, and transportation systems, in many countries and regions around the world.

Mosman Bulk Solid Heat Exchanging

Mosman designs and manufactures high efficient Bulk Solid Heat Exchangers for cooling and heating fertilizers, bio-solids, sugar, salt and plastics. 
The revolutionary none-caking slot-manifold design, in-house manufacturing and proven performances in many product ranges guarantees Mosman to be the best partner for cooling and heating Bulk Solids

Nickelhütte Aue GmbH

Nickelhütte Aue GmbH was founded in 1635 and can now look back on more than 375 years of uninterrupted work. 
Our company, located in Germany, is specialized and worldwide known in recycling and reclaiming of base metals from spent catalysts used in chemical and petrochemical industry, oil hydrogenation and fertilizer industry. We are committed to recycle to the safest and highest environmental standards, ISO 9001, ISO 14001 and OHSAS 18001 certified, and have been awarded in Germany the highly accredited “Entsorgungsfachbetrieb" to deal with hazardous waste.
A state-of-the-art plant coupled with the complete organisation of the transport, logistics and audit-trail service, discharges spent catalyst generators from their Duty of Care responsibilities when the recycling processes are completed.

NIIK (Russia)

R&D Institute of Urea is a leading Russian engineering company with over 65 years of experience. We provide comprehensive services for urea plants:
 - Development and implementation of proprietary technologies for grass-root units and for revamping of existing plants
 - Process inspections and repairs of equipment 
- Equipment procurement 
- Proprietary technology for production of specialty fertilizers in High-Speed Drum Granulator
- Feasibility studies, basic and detailed engineering, adaptation of foreign licensor’s documentation to Russian norms for the projects in Russia
 - Technical supervision

Officine Luigi Resta SpA

Since 1950, Officine Luigi Resta S.p.A  has specialized  in construction of pressure equipment destined to the oil, gas, power, chemical, petrochemical, nuclear industries as well as for critical items for Urea – Ammonia - Methanol plants fabricated in exotic materials or special alloys; for completeness, our After Sales skilled team provides rapid and efficient interventions for Spare Parts assistance, Repairs, Technical assistance & Inspection, Supervisory service.
Our performances, as quality and client satisfaction results, placed our Company in a premier worldwide position in manufacturing, providing continuous cooperation with many of the leading engineering companies and several of the most important end-users.

ONIS LINE BLIND

ONIS is an international group whose focus is the design and manufacture of Quick-Action Line Blinds for positive isolation of process equipment. 
Quick-Action Line Blinds are the higher safety solutions which lead to save operating costs for Oil & Gas upstream & downstream critical applications. 
With 40 years of proven performance and more than 10 000 Line-Blinds in operation worldwide, ONIS is the world leader in Hi-Safe blinding solutions thanks to its unique technology.

PARALLOY

Paralloy manufacture reformer/catalyst tubes, outlet manifolds and pyrolysis cracking coils, for use in the petrochemical industry. Tube assemblies are manufactured by centrispun cast tube technology, weld fabricated to static cast fittings, manufactured in high temperature creep resistant alloys.

Applications include steam reforming processes for hydrogen, ammonia, methanol, direct reduction and syngas furnaces.

ParFab Companies

ParFab Companies is a Preferred Contractor for Ammonia, Methanol, & Ethylene Plant Revamps and Relocations. Specializing in Reformer Revamps, Including Fabrication, Erection, and Maintenance, Specialty Welding, Code Repairs, Process & Boiler Code Piping, 24 Hour Emergency Response, Refractory, ASME Coil Fabrication and Transfer Line Fabrication & Field Installation.

Piller Blowers & Compressors GmbH

Piller Blowers & Compressors supplies customized blowers and compressors for the process industry. Its customers include numerous industries such as the petrochemical, chemical industries or wastewater treatment. PILLER offers a full service from development to project planning, design and manufacturing. Comprehensive services, including commissioning, training, inspection, repair and system optimization.

Poittemill

POITTEMILL is a world leading engineering and manufacturing company specializing in providing solutions for mineral processing in the fertilizer industry for more than 100 years.
Our comprehensive range of pendulum roller mills, hammer mills, lump breakers, universal mills and classifiers for coarse, fine and ultra-fine grinding provide solutions to meet the most demanding expectations.
POITTEMILL equipment is used in the phosphates industry for Phosphoric Acid, SSP, TSP, MAP, DAP and also for other fertilizers including Urea, Ammonium Sulfate, Calcium Ammonium Nitrate and Potash.  We have offices and representatives worldwide and equipment in over 125 countries. 

Project Materials Energy Services GmbH

Partner to the Chemical + Petrochemical Industry
Supplier of:
Piping Materials (Carbon/ Alloy/ Stainless Steel/ Special Alloys, incl. Urea applications), Equipment/ Materials for Industrial Furnaces (Ammonia/ Methanol Production), incl. High-alloy Centrifugally Cast Tubes/ Cast Fittings, Collectors/ Transfer Lines, Pigtails, Hangers, Refractory Lining, Convection Coils, Synthesis Gas Pipelines, Heat Exchangers. Engineering Services and Full Revamp Service.

Protomation bv

Protomation develops Operator Training Simulator software and executes Operator Training Simulator projects for the oil, gas, petrochemical and chemical industry.
Protomation is specialized in innovative simulation-based learning & training solutions, combing e-learning theory with simulation practice, amongst others for Nitrogen & Syngas processes such as NH3, MeOH, H2 and Urea.

Quest Integrity

Quest Integrity provides asset integrity and reliability management services and solutions that help minimise downtime and optimise reformer output. Quest Integrity’s Reformer Care Solution includes advanced inspection and engineering assessment, remaining life assessment, a proprietary materials database and temperature correction software enabling clients to optimally manage their steam reformers.

Raccortubi Group

Raccortubi Group is an international manufacturer and supplier that offers complete piping solutions for various critical applications. As for fertiliser plants, Raccortubi has a significant stock of pipes and fittings in 316L UG and 25.22.2, complemented by flanges to provide full packages for projects worldwide.
The fittings are manufactured at its Italian integrated mills, Tecninox and Petrol Raccord.

Raschig GmbH

Raschig GmbH is a manufacturer of packing, tower internals, trays and wire mesh products. Since decades our high performance equipment is applied in the chemical, petrochemical, refinery, environmental and process related industry 
Our outstanding engineering knowhow combined with efficient products make Raschig a reliable partner to our customers.

Reformer Services

Reformer Services is a leader in Specialize NDT Inspection services. We serve clients in the Petroleum, Chemical, and SynGas Industries. We specialize in steam methane reformers for tube inspection, catalyst loading and tube cleaning.
Our team of experienced professionals are passionate about our work and believe in providing quality from beginning to end. We believe in building long-term relationships with our clients to provide project solutions on the complete reformer system. Safety, quality, communication, integrity and innovation guides our efforts on a daily basis in helping us to exceed our client expectations.
Reformer Services thrives on being your full-service reformer project solution. Our team of professionals can provide technical advice on all aspects of your project to add value and lower cost.
Whether you are planning new construction or an upgrade or expansion, please call us today to discuss your current and future project needs.

Rotex

Since 1844, ROTEX has been a pioneer in the development of high performance screening and separation equipment, providing innovative solutions for process industries around the world. Our full line of best-in-class screening equipment, feeders, conveyors, and automated analyzers go above and beyond meeting the application requirements for agriculture, chemicals, fertiliser, food, minerals, plastics, recycling and much more.

Saipem SpA

Saipem is a leading company in engineering, drilling and construction of major projects in the energy and infrastructure sectors. It is “One-Company” organized in five business divisions (Offshore E&C, Onshore E&C, Offshore Drilling, Onshore Drilling and XSight, dedicated to conceptual design). Saipem is a global solution provider with distinctive skills and competences and high-tech assets, which it uses to identify solutions aimed at satisfying customer requirements. Listed on the Milan Stock Exchange, it is present in over 60 countries worldwide and has 32 thousand employees of 120 different nationalities.
Saipem has licensed more than 130 units with its proprietary Snamprogetti™ Urea Technology and it has designed and built over 30 major ammonia/urea complexes.

Sandvik Materials Technology

Sandvik is a world leading producer and supplier of corrosion resistant materials with more than 40 years experience delivering high quality products and developing grades for various fertilizer applications. Especially for high pressure urea service most of the plants in the world use our products and the longest service record has been set with Sandvik grades.

SCHADE Lagertechnik GmbH

SCHADE Lagertechnik GmbH (AUMUND Group) ranks among the worldwide leading suppliers of bulk material stockyards and blending bed technology for all major industries. 
SCHADE designs and supplies stockyards and blending beds of circular or longitudinal shape with stackers, tripper cars, bridge-type scraper reclaimers, portal and semi-portal scraper reclaimers, cantilever scraper reclaimers as well as wagon unloading systems for handling fertilizer, coal, ore, limestone and many other bulk materials. 

Schmidt + Clemens Group

Schmidt + Clemens, the leading manufacturer of corrosion and heat resistant alloy tubes made by the centrifugal casting process.
Our tube systems and components are used in the petrochemical industry as reformer tubes for fired heater in hydrogen, ammonia and methanol units as well as radiant coils for steam crackers.
S+C also established itself as reliable partner when it comes to the installation of tube systems.

SCHMIDTSCHE SCHACK | ARVOS GmbH

SCHMIDTSCHE SCHACK | ARVOS GmbH
SCHMIDTSCHE SCHACK is a leading designer and fabricator of process critical heat transfer solutions for the chemical, petrochemical and metallurgical industries. Custom made coolers and heat exchangers treat process gases at very high temperatures of up to 1.500°C (2,730°F) and high pressures of up to 400 bar (5,800 psi). Examples include:
• Schmidtsche® Process Gas Coolers and Schmidtsche® Steam Superheaters for Ammonia, Methanol
• SCHACK®Process Gas Cooling systems for Nitric Acid production 
• Schmidtsche® Syngas Coolers for gasification processes
• Equipment service and customer care

SCHMIDTSCHE SCHACK HQs and workshops are in Kassel, Germany, branch office in Düsseldorf, affiliated offices are in Houston TX and Wexford (Pittsburgh) PA, USA, Kobe, Japan and Shanghai China. 

SCHMIDTSCHE SCHACK is a partner to world leading engineering companies, process developers, contractors and operators.

Schoeller-Bleckmann Nitec GmbH

Schoeller-Bleckmann Nitec (SBN), a member of the Christof-Group, are specialists in the fabrication of high pressure heatexchangers and reactors for the fertilizer industry and particularly for ammonia and urea plants.

Comprehensive material knowledge and decades of know-how in the design and production of sophisticated pressure vessels in either monowall or multilayer construction result in optimum implementation of customers’ requirements, while focusing on highest possible quality in design and finish as well as on-time delivery.

As a leading manufacturer of high-pressure equipment, SBN can also offer its customers special services on site, for example
• on-site modification
• repair of urea reactors and high pressure heat exchangers
• relining
• field installation
• inspection
• maintenance

Siemens AG

Siemens is a global trusted partner for the fertilizer industry. The portfolio comprises products and in particular modular, integrated solutions for automation systems, drive technologies, rotating equipment, energy management as well as industrial software and services, incl. IoT/Digitalization of whole plants targeting for maximum productivity, safety, efficiency and transparency.

Solex Thermal Science Inc

Solex specializes in heating, cooling and drying bulk solids with over 20 years of experience and more than 130 successful installations in the fertilizer industry. Solex coolers serve all kinds of fertilizer including Urea, NPK, AN, CAN. A wide network of agents and service centres provide commissioning service, after sales support, and process optimization.

SpectraSensors

The Optograf™ Analyzer, combined with the OptoAST™and OptoDRS™ Sampling Systems, is an ideal solution for measuring the composition of hot, dirty, steam-saturated process gas streams from gasifiers, steam reformers, and shift converters that are commonly found in syngas-related industries (Methanol, Ammonia, Hydrogen, SNG).  The Optograf, manufactured by Kaiser Optical Systems, Inc., is sold and supported exclusively by SpectraSensors, both Endress+Hauser companies.

SPETECH

Worldwide operating manufacturer of SPECIAL METAL SEALS for high performance chemical & fertilizer applications. Since 30years supplying critical SEALING SOLUTIONS for Ammonia, Urea, Potash, Phosphate, Methanol, Melamine, Nitric Acid installations, pipelines and pressure equipment like Reactors, Converters, Strippers, Boilers, Heat-Exchangers.
SPETECH production program cover all top performance sealing profiles like: Weld Ring Gaskets (Lip Seals), Double Cones Seals, Metal Diaphragm Closures, Manhole Gaskets, Lens Gaskets, RTJ Gaskets, Baffle Seals. All our fully customized SPECIAL METAL SEALS we manufacture from very wide range of special metallic alloys including those approved by major licensors. 

Stamicarbon

Stamicarbon is a global leader in the design, licensing and project development of urea plants and a supplier of high-end equipment and services for the petrochemical industry. A pioneering company specialized in the fertilizer industry with a vision to help enable the world to feed itself and improve the quality of life. Stamicarbon applies its expertise and experience in several markets: crop nutrition and fertilizers, air quality and emission reduction and technologies for the integration of urea and adjacent processes, such as melamine and nitric acid.
For more than 70 years we have been at the forefront of developments and innovations by designing reliable, safe, efficient and sustainable plants. There are around 260 licensed urea plants (more than half of the installed world capacity) and some 110 revamped projects around the world already using our technology. We work closely with research institutes, contractors, suppliers and our licensees to further enhance and develop technologies for the benefit of our customers, but also to create opportunities for adding nutrients to crops, replenish arable land and increase crop yields.
Part of the Maire Tecnimont Group, the Stamicarbon headquarters is in Sittard, The Netherlands, with representative offices in Russia and China and a sales office in the USA. Together with our excellent network of reputable partners we can provide technologies, equipment, products and related services needed to improve the food supply of the world.

Telus Applications For Industry SA

TELUS is key supplier for UREA and NITRIC ACID production.  
We keep on stock plates, bars, pipes, fittings, and pre-material in SPECIAL STAINLESS STEEL: UREA grades (310MoLN, 316LUGMod), NITRIC grades (310LNAG – URANUS®S1), SANICRO®28, Alloy 625, Alloy 825,…  We offer these products cut-to-dimension, bend / weld special piping, spools, elbows,…and we reforge / machine special fittings.

thyssenkrupp Industrial Solutions

thyssenkrupp Industrial Solutions is one of the worlds leading designer and supplier of plants for the chemical, petrochemical, coke, minerals and mining, and the automotive industries and also for marine vessels. For the Nitrogen and Syngas Industries, thyssenkrupp Industrial Solutions offers own and licensed technologies and EPC competence for all kinds of fertilizer plants including ammonia, urea, ammonium nitrate, DAP etc. as well as nitric acid, hydrogen and explosives or own processes for the production of Methanol ranging from 10 tons per day to the unique single train up to 10,000 tons per day AdWinMethanol ® process. For greenhouse gas reduction in nitric acid plants, the EnviNOx® system is available. High pressure equipment, prefabricated  isometrics (piping)  and valves for the urea industries are offered from thyssenkrupps own manufacturing branch Uhde High Pressure Technologies and the worlds leading Fluidized Bed Granulation Technology for urea is licensed by thyssenkrupp Fertilizer Technology. Our customers benefit from cost-effective high-tech solutions in construction of new production units, improvement of existing plants and the entire range of services for the full life cycle of their plants. That’s what we call 360° Service.

TMS 2bv

TMS2 bv is a global manufacturer offering a complete range of proprietary Bensol® Potassium Vanadate liquid Corrosion Inhibitors and ProAct® and Promine Promoters for use in Hot Potassium Carbonate CO2 removal technologies including Benfield, Catacarb and Giammarco Vetrocoke. We offer a range of standard solutions in packing according to customer needs (drums, totes/IBCs & bulk roadtanker) in North America, Europe, The Middle East and beyond. 
We work with your engineers to model and understand your specific requirements allowing us to produce Custom blends to help you precisely obtain the optimum parameters for your CO2 removal unit.

TMS2 bv also works with our customers in dealing with their waste catalysts containing Zn, Cu/Zn, Ni, Mo, V, W and precious metals etc. from the following processes: Low-Temperature Shift, Hydrogenation Reactor, Desulphurization, Methanation, Primary Reforming etc.

Toyo Engineering Corporation / Sumitomo Corporation

Toyo Engineering Corporation (TOYO) is one of the world’s leading engineering contractors. Since its foundation in 1961, TOYO has actively deployed Engineering, Procurement, and Construction (EPC) businesses, and successfully delivered large and complex projects in more than 50 countries, focusing on the segment of energy, oil refining, petrochemicals & chemicals, oil & gas development, infrastructure, environment, and other manufacturing facilities. In addition, TOYO has been a leader in the urea industries as a urea process licensor as well as EPC contractor, and provides the effectively optimized fertilizer complex by integrating with TOYO’s own urea process. 

Tubacex

TUBACEX is a leading global producer of stainless steel seamless tubes. We have a fully integrated production process including steelmelting, hot extrusion and cold rolling or drawing of the tubes. More than 10 Mills around the world enable Tubacex to offer high quality products for the fertilizer industry
TUBACEX offers high quality products for Urea Industry, such as 316LUG, 25.22.2 and Uremium 29 (S32906), as well as all grades used in Nitric Acid, Ammonia, Melamine or any other application in the Fertilizer Industry. Grades available in a wide dimensional range that covers OD6mm to 72” tubes, pipes, fittings and additional materials on demand.

Tube Tech International Ltd

Tube Tech International, a global leader in fouling removal solutions, will be showcasing its patented robotic technology as well as its Horizon 2020-funded Shell Side Jet™ solution which is the first ever guaranteed technology to remove fouling between the tubes on the shell side of shell and tube exchangers.

Ventilatorenfabrik Oelde GmbH

Ventilatorenfabrik Oelde GmbH, also known as “Venti Oelde”, a plant and component constructor, offers a wide range of products and services for the collecting, handling and filtering of air, vapours, gases, dust and air-borne solids. The manufacturing program includes industrial fans, dust collection plants, ventilating, heating and air-conditioning plants and recycling systems.

VILLA & BONALDI - Italy

VILLA & BONALDI is specialized and experienced in design and fabrication of SHELL AND TUBE HEAT EXCHANGERS - of medium and big size-, for Process Industries including those for H.P. services. Since 2014 VILLA & BONALDI is part of BREMBANA & ROLLE Group a global player in the Oil & Gas Industry with four shops in Italy fully equipped for the production of any kind of static equipment including Heavy Wall Reactors and Fired Heaters.

Vselug Machinery Building Company LLC

VSELUG Company delivers
production line for packaging products of chemistry and transporting filling bags
packing machines for filling of valve bags
packing machines for filling of open mouth bags
packing machines for filling of big bags
bag loader
screw conveyors
elevators
mixers
bag house filters
Service VSELUG Company
consultation of Customer
design of technological lines and schemes
supervision and start-up

Zeeco Europe

Zeeco Europe is the European headquarters of Zeeco, Inc., the global leader in combustion and environmental solutions, including the refining, petrochemical, marine and offshore, and gas processing/LNG industries. Zeeco offers ultra-low NOx burners, flaring systems, thermal oxidisers, flare gas recovery systems, equipment rentals, and parts and service. Visit www.zeeco.com today. 

Zwick Armaturen GmbH

Zwick Armaturen GmbH is a leading manufacturer of high integrity, metal-seated, triple offset butterfly valves known as series TRI-CON.
These valves are ZERO LEAKAGE although metal seated and fugitive emission certified as a standard.
Further developments are Control, Check, DBB, O2 and cryogenic valve designs.